New Master Box to Test RCDs That will NOT TRIP the Building Supply RCD ... Guaranteed

Tests are carried out by Plugging the RCD Test Box into a Building 13a, 16a, 32a, or 63a 230V Socket, or a 400V 3 Phase 5 Pin Socket (or other Varieties with Adaptors) Socket either RCD Protected or not without fear of Tripping the Building RCD as the Test Box is Fully Isolated

The RCDs will plug directly into the Sockets mounted on the Box & the RCD Tester into the RCD Socket

Types of RCD: 2000 Electrical Test Bay RCD 230V Plug in 230V, In-Line 230V, Box Mounted 230V

Adapters are available as required

These Adapters can also be used for Box Mounted and in-line RCDs so the RCD Tester can be Plugged in after the RCD

A carrying Handle is fitted to ease Mobility

The Blue LED Indicator confirms Power in and the 2 Red LEDs indicate the secondary Voltage. The Red, Yellow & Blue Lamps indicate that the 3 Phase is in use

The outputs are protected by a 3a Fuse next to the Red LED Indicators

Socket Outlets on the Box are 13a, 16a, 32a, & IEC 230V

The Primary is protected by a 3a Fuse and the 3 Transformer Outputs are protected by a T160ma Fuse.

The Box is Vented

Supply Lead 5 Core 1.5mm H07RN-F Cable 2 Metres Nominal fitted with 32a 5 Pin 3 Phase Plug

32a 230V 3 Pin Plug to 32A 5 Pin 3 Phase Trailing Socket Adapter and a 13a Plug to32a 5Pin 3Phase Trailing Socket Adapter. The Box is not suitable and should NOT be used as an Extension Lead or Adapter of any kind.

It is designed to be ONLY used as and Adapter for Testing RCDs.